Systemair VVX

We supply filters for Systemair's SAVE range — VTR, VSR, VTC and VR models — one of the most widely installed residential and light-commercial MVHR series in Europe. That includes the popular models listed above: VTR 150, 275, 300, 500, 700 and VSR 200. The SAVE model variant is printed on the unit's front panel label.

Most SAVE units use two classes:

• M5 extract filter
• F7 (ePM1) supply filter

Some models differ: the SAVE VTR 200 (BF), VTR 300 (BF) and VR 250 take a coarser G3 extract filter with F7 supply, the VSR 150 comes with G3 or M5 extract, and the VTC 200 takes G4+G4. Each product page shows the exact classes for your model.

The standard interval is every 3–6 months, depending on air pollution, pets and the number of people in the household. Systemair SAVE units are used in both large commercial buildings and homes to the same engineering standards, so the residential filter is also designed to withstand continuous, reliable operation. Regular filter replacement maintains stable airflow and protects the heat exchanger from premature clogging, especially in the intensively used SAVE VTR 500 and VTR 700 models with higher airflow rates.

Yes, ordering multiple sets several years ahead is a popular choice among SAVE VTR and VSR owners who'd rather order filters once a year than remember to do it separately every 3–6 months. Such bulk orders are usually cheaper per unit than buying one at a time. Before ordering a larger quantity, be sure to confirm your exact VTR model code (e.g. VTR 500 or VTR 700), as filter dimensions vary between different SAVE variants.

Yes – filter replacement in Systemair SAVE VTR and VSR units is designed as a user task. Switch the unit off, open the front door, pull out the two filters (extract and supply), and insert the new ones in the same positions, paying attention to the airflow arrow on the frame. Close the door, switch the unit on and reset the filter timer on the control panel, if your model has one. No tools or technician are needed, and the whole job takes about five minutes.

Yes. All the Systemair SAVE filter sets we stock are originals, so their size and filter class match what the unit was supplied with. Each SAVE model takes its own set – for example, the VTR 300 and VTC 300 use different sets, and so do the VTR 300 (BF) and VTR 300 (PF) – so check the full model code, including PF or BF, on the front panel label before ordering.